' &"
! "#$
%&&
Lerchenfeldstr. 9
87600 Kaufbeuren
Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
34
minimum clear distance of 100 mm and make sure that the ventilation slots are
not covered.
Length: 502 mm / Width: 373 mm / Height: 245 mm
The space provided for the device must not be smaller than the dimensions
specified above, since a minimum clear distance of 100 mm must be provided
all the way around it. The separate box for the device must be provided with
ventilation holes at the top and sides, with a total area of 10,000 mm².
The device should be placed as close as possible to the battery, but
always in a
separate box. The box for the battery must have a ventilation hole facing
towards the outside.
Attach the device securely with the four fastening screws supplied. The legs of
the device can be turned 90°. To do so, the bolts at the legs must be loosened.
Then the legs can be turned and re-tightened.
Important
Make sure that the ventilation slots remain unobstructed! The minimum clear
distance must be 100 mm all around! Insufficient ventilation can cause
overheating of the device! The device is designed for operation in ambient
temperatures of up to 35 °C. If the temperature inside the device rises due to a
lack of air circulation or due to high ambient temperature, the charging current
is automatically reduced in steps.
To Next Page
Loading...
