CallingSYS ZJ-66 User Manual

Queue Wireless Calling System
User Manual
Wireless calling system
Queue
wireless calling system

CallingSYS ZJ-66 Specifications

General

Brand	CallingSYS
Model	ZJ-66
Category	Telephone System
Language	English

Summary

Technical Data

Keypad Call Button Specifications

Diagram of Call Button Keypad

Diagram of Receiver

Receiver Button Functions

Power Button Function

Press and hold for 3sec to power on/off. Short press to reset standby status.

Pairing Button Function

Press and hold for 3sec to enter pairing status.

Mode Button Function

Changes prompt mode: vibration only or vibration & buzzer.

Keypad Input and Calling

Use 0-9 to select number (1-999), press 'Call' to send. Use 'Backspace' to delete.

Operation Instructions

Connecting and Powering On

Connect keypad to power. Power on receiver (3s hold), it vibrates, sounds, and LED1 flickers. Plug receiver into charging slot for charging.

Issuing Receivers to Clients

Give receiver to client, note down the number. Service people press keypad to call client when order is ready.

Receiver Call Notification

Pairing Method

Pairing a Receiver

Hold 'Pairing' for 3s, LED1 on. Press call number on keypad. Receiver vibrates 3 times upon successful pairing.

Deleting All Pairings

Hold 'Pairing' for 5s, LED1 ON-OFF, release button to delete all paired call buttons.

Changing Receiver Number Paper

Charging the Receiver

FAQ

Packing List