Important safety instructions
For
your
own
safety please read the following important safety instructions
carefully before attempting to connect this unit to the mains power supply.
They
will also enable
you
to
get the best performance and prolong the life of
the unit:
1.
Read
these instructions.
2.
Keep
these instructions.
3.
Heed
all warnings.
4.
Follow all instructions.
5.
Do
not use this apparatus near water.
6. Clean only with a dry cloth.
7.
Do
not block any ventilation openings. Install
in
accordance with the
manufacturer's instructions.
8.
Do
not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do
not defeat the safety purpose of the polarized
or
grounding-type plug.
A
po
larized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
blade or the
th
i
rd
prong are provided for your safety.
lfthe
provided plug
does not
fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10
. Protect the power cord from being walked
on
or pinched, particularly
at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11
.
Only
use attachments/ accessories specified
by
the manufacturer.
12
.
Use
only with the cart, stand, tripod, bracket, or table
specified
by
the manufacturer, or sold with the apparatus.
~
When a
cart
is used, use caution when moving the
""
cart;apparatus combination to avoid injury from tip-over.
13
. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14
. Refer all servicing to qualifi
ed
service personnel. Servicing is required
when the apparatus has been damaged
in
any
way
, such as the power·
supply cord or plug being damaged, liquid has been spilled
or
objects
have
fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate
normally, or has been dropped.
WARN
I
NG
·To
reduce the risk
of
fire
or
electric shock, do not expose
th
is unit
to
rain
or
moisture.
- Batteries (battery pack
or
batteries Installed) shall not
be
exposed to
excessive heat such as sunshine, fire
or
the like.
The
unit must be installed
in
a manner
that
makes disconnection of the
mains plug from the mains socket outlet (or appliance connector from the
rear of the unit) possible. Where the mains plug is used as the disconnect
device, the disconnect device
shall remain readily operable.
Only
use the
mains
co
rd supplied with this unit.
Please ensure there is ample ventilation (at least 10cm clearance
all round).
Do
not put any objects
on
top of this
un
it.
Do
not situate it
on
a rug or other
soft surface and do not obstruct any air inlets or outlet
grilles.
Do
not cover
the ventilation
grilles with items such as newspapers, table-cloths, curtains
etc.
This unit must not be used near water or exposed to dripping or splashing
water or other liquids.
No
objects filled with liquid, such as vases, shall be
placed
on
the unit.
2
The
lightning flash with the arrowhead symbol within
an
equilateral triangle
is intended to alert the user to the presence
of
un·insulated 'dangerous
voltage' within the product's enclosure that
may
be
of
sufficient magnitude
to constitute a risk of electric shock to persons.
The
exclamation point within
an
equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions
in
the service literature relevant to this appliance.
The
symbol
on
this product indicates
that
it
is of
CLASS
II
(double
insulated) construction.
WEEEsymbol
The crossed-out wheeled bin is the European Union symbol for
indicating separate collection for electrical and electronic
- equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please return the
unit or contact the authorised dealer from whom
you
purchased this product
for more information.
C
~
CEmark
~
This product complies with European
Low
Voltage
(2006
/
95
/
EC),
Electromagnetic Compatibility
(2004
/ 108/EC) and
Environmentally-friendly design
of
Energy-related Products (2009/125/EC)
Directives when used and
installed according to this instruction manual.
For
continued compliance only Cambridge Audio accessories should be used
with this product and servicing must be referred to qualified service
personnel.
,..,.
C-Tick
mark
" This product meets the Australian Communications Authority's
Radio communications and
EMC
requirements.
t.f11!!
Ross
Test Stamp
,.;
This product meets Russian electronic safety approvals.
FCC
regulations
NOTE
:
THE
MANUFACTURER
IS
NOT
RESPONSIBLE
FOR
ANY
RADIO
OR
TV
INTERFERENCE
CAUSED
BY
UNAUTHORIZED
MODIFICATIONS
TO
THIS
EQUIPMENT
.
SUCH
MODIFICATIONS
COULD
VOID
THE
USER
AUTHORITY
TO
OPERATE
THE
EQUIPMENT
.
~
This equipment has been tested and found to comply with the
~
limits for a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits are designed to provide reasonable protection
against
ha
rmful interference
in
a residential installation. This equipment
generates, uses and can radiate radio frequency energy and,
if
not installed
and used in accordance with the instructions, may cause harmful
interference
to
radio communications. However, there is no guarantee that
interference
will not occur in a particular installation.
If
this equipment does cause harmful interference to radio or television
reception, which can be determined
by
turning the equipment
off
and
on,
the user is encouraged to try to correct the interference
by
one or more of
the
following measures:
· Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
- Connect the equipment into
an
outlet
on
a circuit different from that to
which the receiver is connected.
· Consult the dealer or
an
experienced radio/
TV
technician for help.
To Next Page
Loading...
Need help?
General
