Cambridge SoundWorks SoundWorks Radio 820HD User Manual

Details warnings about using the plug with extension cords and preventing blade exposure to prevent fire or shock hazards.

Provides cautions regarding water exposure and removing the back cover to reduce the risk of electric shock.

Instructions to locate and remove the Antenna Pack and Whip Antenna from the carton.

Guidance on connecting FM and AM antennas using the provided leaflet.

Steps to firmly insert the AC cord connector into the back panel socket.

Procedure to place the radio in its location and connect the AC plug to a 120 VAC outlet.

Instructions on powering on the radio and setting the current date and time using the JOG button and VOLUME control.

How to select the AM/FM/Aux band and use TUNE or SEEK for station tuning.

Guide on storing up to ten radio stations for immediate recall using PRESET buttons.

Instructions for assigning up to twenty additional stations to the FAVORITE organizer band.

Explains the Favorite band's organization of up to thirty stations, combining Presets and additional Favorites.

How to tune to a station and press/hold the FAVORITE button to assign it.

Procedure to tune to a station and press/hold the FAVORITE button to remove its favorite status.

Details how the receiver builds a digital information reserve for HD Radio broadcasts before playing audio.

Enables listening to weak HD Radio signals by forcing analog reception, with options to restore digital.

Displays indicating the status of HD Radio™ Program Stream and HD Carrier Light.

Description of buttons and knob for tuning stations and navigating HD Radio multicast streams.

Function of the button to select input bands (AM/FM/Aux) and knob for adjusting audio volume.

Functions of remote control buttons for setting alarms, activating favorite stations, and powering the device.

Details on using Jog button for menu navigation and numeric keypad for direct station entry.

Controls for displaying information, switching between analog/digital modes, and setting the sleep timer.

Enables display of radio broadcast's audio spectrum intensity across ten frequency bands.

Lists settings accessible via JOG menu, including Bass/Treble, Display Text, Favorites Mode, and Audio Display.

Set alarms for Wake To Music (radio) or Wake To Tone (beep sound).

Instructions on how to reset an active alarm and how to use the snooze function for temporary silencing.

Options to program alarms for Once, Daily, Weekdays (Mon-Fri), or Weekends (Sat-Sun) activation.

Press and hold the Alarm button, then use the VOLUME control to select the desired hour for the alarm.

Tap the Alarm button again, then use VOLUME to select the desired minutes for the alarm.

Tap the Alarm button, then use VOLUME to choose the FM or AM band for the wakeup station.

Tap the Alarm button, then use VOLUME to select the specific station frequency for the wakeup.

Tap the Alarm button, then use VOLUME to select the desired volume level for the wakeup alarm.

Tap the Alarm button, then use VOLUME to choose the daily repetition pattern for the alarm.

Adjust VOLUME to select the desired daily alarm repetition pattern (e.g., Daily, Weekdays, Weekends).

Tap the Alarm button one last time to finish and exit the alarm adjustment session.

Tap the Alarm button to cycle through Music Wakeup, Tone Wakeup, or NO alarm modes.

Wait five seconds after selecting the desired mode for the radio to store the setting.

Press the Alarm 1, Alarm 2, or Power button to stop an active alarm.

Silences the wakeup alarm for a user-determined interval before it reactivates.