CAME BPT 60020380 - User Manual

Need help?

Do you have a question about the CAME BPT 60020380 and is the answer not in the manual?

Summary

General Safety Precautions

General Precautions

Important people-safety instructions for installation, programming, commissioning, and maintenance.

Factory Default Restoration

Restore Factory Default

Procedure to restore the MTMNA module to its factory settings by specific code entry.

Master Mode Programming

Programming in Master Mode

Associating numerical access codes to users for relay-switch activation and management.

Programming Device Functions

Changing Master Code

Procedure for modifying the master code of the programming device.

Deleting Codes List

Function to erase all stored codes from the programming device.

Associating User ID and Code

Linking user identifiers and access codes to specific relay switches.

Removing User Codes

Procedure to remove all user codes associated with a specific relay switch.

Setting Relay Switch Time

Configuring the activation duration for relay switches 1 and 2.

Setting LED Color

Function to adjust the color of the LED indicators on the keypad.

Setting LED Brightness

Adjusting the brightness levels of the LEDs on the keypad.

Setting Tone

Configuring the audible tone output of the device.

Slave Mode Programming

Programming in Slave Mode

Programming via CAN BUS using PCSXIP software.

Using the Device

Operating Modes

Details on how to use the device with access codes and confirmation signals.