Page 29 - Manual - FA01792-EN - 10/2022 © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
SECOND FUNCTION
Confi gure the button as the SECOND FUNCTION in the OSD menu under [Auxiliary controls].
In the DEFAULT confi guration, the , and buttons are used for calling the respective internal receivers. Using the
SECOND FUNCTION, the same buttons can be used to call internal receivers 4, 5 and 6.
To activate the function, press .
Release the button within 2 seconds.
With the function active, the
, , and button LEDs will fl ash.
Press the
button again to disable the function manually.
If the function is not disabled manually, it remains active for approximately 10 seconds.
Auxiliary controls (AUX function)
Confi gure the , , and buttons as AUX in the OSD menu under [Auxiliary controls].
Auxiliary controls are customised, accessory functions set up when the video intercom is
installed.
Examples include switching on a light or opening a gate.
Press the desired AUX button ( , , or ) to activate the associated auxiliary
control.
Accessory devices may need to be installed, depending on the type of command to
be activated.
To Next Page
Loading...
