CAME GUARDIAN Series - 9 Electrical connections; 9.1 Power; 9.2 Connecting devices to the control panel

L
N
+
E
-
EbA EbA
EbI EbI
Pag.
22
22 - Manual code:
119G3055
119 G30 55 ver.
1.0
1.0 10/2009 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Note: set the DIP switches on the back of the board in order to allow traffic lights to work properly with the rotation direction of the turnstile.
9.1 Power
Cable gland
Endpoint
Electromagnet
Electromagnet
9.2 Connecting devices to the control panel
9 Electrical connections
Note: the below descriptions and illustrations refer to the single turnstile, the double turnstile require doubling the electrical
connections for the devices
230V A.C. power, 50/60Hz
frequency
The cables running through the electrical control
panel must be secured to the proper cable holders.
Electromagnet
LED stop/go lights
White
Brown
Green
Intelligent Security & Fire Ltd.