2451
cl
u1
u2 1
4
1123000
s
Page 11 - Manual FA01357-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Storing a user transmitter is always associated to a control mode (see funtions [F 2]/[F 3]/[F 4]/[F 5]).
Remove the Memory Roll card, before proceeding.
U 1 - Store Users (max. 3,000)
U 2 - Delete users
• Enter the programming, select Store Users [U1].
• Enter the programming, select Delete Users [U2]
and then [1].
• Choose which relay to associate to the code [1]/[2]/[3]/[4].
• The wording [3000] will appear.
Select the user to delete and press [ENTER]:
• The first available position for storing will appear.
The available positions are the flashing ones.
• The display will show the [CLr] wording to confirm that the single
user has been deleted. and the corresponding numbering will start
flashing: select the next user or exit the procedure by using [ESC]
• Send the code by using the transmitter (even in sequence), the [Sto]
wording will appear to confirm it have been saved.
When the maximum number of users is reached, the wording
[FULL], will appear.
Page 11 - Manual FA01357-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions
To Next Page
Loading...
