CAME ZL65 - Safety devices; DELTA photocells; DIR; DELTA-S photocells

Page 14 - Manual FA01359-EN - 03/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Safety devices
During programming, confi gure the type of action that must be performed by the device connected to the input.
Connect the safety devices to the CX and/or CY inputs.
If contacts CX and/or CY are not used, they must be deactivated during programming.
DELTA photocells
Standard connection
DELTA photocells
Connection with safety test
See function [F5] Safety devices test.
+-
NO C NC
+-
RX TX
10 11 E 5
10 TS 2 CX CY
NO C NC
RX TX
10 11 E 5
10 TS 2 CX CY
+- +-
DIR / DELTA-S photocells
Standard connection
DIR / DELTA-S photocells
Connection with safety test
See function [F5] Safety devices test.
+
10
-
2TXCNC TX 2
RX TX
10 11 E 5
10 TS 2 CX CY
+
10
-
2TXCNC TX 2
RX TX
10 11 E 5
10 TS 2 CX CY