CAME ZL65 - RIO PH T1; RIO PH T2; New user

Page 24 - Manual FA01359-EN - 03/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
RIO PH T1
Associate one of the available functions with a wireless safety device.
The function only appears if there is an interface board for wireless devices.
F67 RIO PH T1 OFF (Default)
P1 = Reopen while closing.
P2 = Reclose while opening.
P3 = Partial stop. Only with [Automatic
close] activated.
P4 = Obstacle standby.
RIO PH T2
Associate one of the available functions with a wireless safety device.
The function only appears if there is an interface board for wireless devices.
F68 RIO PH T2 OFF (Default)
P1 = Reopen while closing.
P2 = Reclose while opening.
P3 = Partial stop. Only with [Automatic
close] activated.
P4 = Obstacle standby.
New user
Register up to a maximum of 250 users and assign a function to each one.
The operation can be carried out by using a transmitter or another control device. The boards that manage the
control devices (AF - R700 - R800) must be inserted into the connectors.
U1 New user 1 = Step-by-step
2 = Sequential
3 = Open
4 = Partial opening
Choose the function to be assigned to
the user.
Press ENTER to confi rm.
Send the code from the control device.
Repeat the procedure to add other
users.
Download the LIST OF REGISTERED USERS form from the docs.came.com portal by typing in L20180423.