CAME zl92 - Motor Operational Tests; Test Activation and Procedure; Gearmotor Direction Verification

ESC < > ENTER
I
ESC < > ENTER
2
a
< >
<
<
>
>
ESC < > ENTER
---
M2M1
ESC < > ENTER
oP2
M2M1
ESC < > ENTER
oP I
P. 24 - Manual code: 319V21EN Vers. 3 04/2017 © CAME cancelli automatici S.p.A. - The data and information in this manual are subject to change at any time without prior notice required by Came Cancelli Automatici S.p.A.
ENGLISH
Motor tests
1) Select “A2”.
Press ENTER to confirm.
2) Select 1 to activate test.
Press ENTER to confirm...
3) … “---” will be displayed, standing by
for a command…
4) Keep the “>” key pressed down and
check that the gate leaf of the second
gearmotor (M2) opens fully.
Note: if the gate leaf closes instead of
opening, invert the motor phases (M2 with
N2).
5) Carry out the same procedure with the
“<” key to check the gate leaf of gearmotor
(M1).
Note: if the gate leaf closes fully, invert the
motor phases (M1 with N1).