CAME ZLX24MA - Programming Interface and Getting Started; ESC Button Operation; < > Buttons Operation; ENTER Button Operation

15 - Manual FA01796-IT - 04/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
PROGRAMMING
Programming button functions
1
ESC button
The ESC button is used to perform the operations described below.
Exit the menu
Delete the changes
Go back to the previous screen
Stop the operator
2
< > buttons
The <> buttons are used to perform the operations described below.
Navigate the menu
Increase or decrease values
3
ENTER button
The ENTER button is used to perform the operations described below.
Access menus
Confi rm choice
Outside the menu, the ESC key stops the gate and the < > keys open and close the gate.
Getting started
Once the electrical connections have been made, proceed with commissioning. Only skilled and qualifi ed sta may perform this operation.
Please see the full control panel manual for information on the additional functions relating to the encoder, limit switch and slowdown switches.
Make sure that there are no obstacles in the way.
Power up the device and begin programming.
With mechanical and electronic stops, follow the confi guration below.