CAME ZM3ES - Code and Function Association Management; Procedure for Changing User Codes; Procedure for Associating Functions with Users

ACCESS CONTROL
Page
15
15 - Manual code:
FA00321-EN
FA00321-EN vers.
1
1 02/2017 © CAME S.p.A. - The data and information shown in this manual are to be considered subject to change at any time and without the need for any advance warning.
1. From
the[USERS] menu,
choose [Change
Code]. Press
ENTER to confirm.
2. Choose the user
name for which you
wish to change the
code and press ENTER
to confirm.
4. ... once the code
has been entered, the
user name will come
up showing the type
of command that was
saved...
3. ... you will be asked
to input a code.
Send the code from
the transmitter using
the swipe card or the
transponder.
1. From the
[USERS] menu,
select [Assoc
Function]. Press
ENTER to confirm.
2. Choose the user
name for which you
wish to change the
function and press
ENTER to confirm.
4. Select [confirm?
(yes)] and press ENTER
to confirm.
3. Choose the new
function to assign to
the user. Press ENTER
to confirm.
5. Select [confirm?
(yes)] and press ENTER
to confirm.
Changing codes
Function associated with the user
Select user
< Change Code >
Change Code
Wait for code
>>>>>>
002
Radio
Change Code
< 002: --U002-- >
<Assoc Function>
Assoc Function
<Confirm?(yes)>
Select user
< 002: --U002-- >
Assoc Function
Assoc Function
< 2-7 >
Change Code
<Confirm?(yes)>