camera body shake and alarm with alert when the battery is full, the screen will
alert storage full, the camera body shake with Alert tone alarm.
• Power Saving Mode
When no operation after 1 min, 3 min, 5 min (optional in menu), the LCD screen
will close automatically to save power. Press any key to reopenthe LCD.
Short press key
at a time to turn off LCD, short press any key LCD will reopen,
and camera return to normal.
Device added with MCU function, it can switch to deep standby mode when not
any operation in 15mins, you can press any button to switch on the screen.
• Charging ( Li-ion Rechargeable Battery )
Battery will be full after 4 hours charging under the camera is power off (Using
charger equipped). During the charging, indicator light will turn red, and turn
green when it is full.
While using multifunctioal base charger, plug the camera into the base, and
connect the power, the red power light on the charger turn on, and camera boot
automatically.You need to turn the camera off manually, and red indicator light on
the camera body will turn on, which will turn green when the battery is full.
e Charging Ways
v/ USB connect to computer
s/ Multifunctional base charging
v/ Charger connect to 220V power charging
15
To Next Page
Loading...