To Next PageTo Next Page
Need help?Do you have a question about the CAMP SMOKE PRO PG24XT and is the answer not in the manual?
Specifies outdoor use, manual adherence, and risks like fire/explosion.
Emphasizes maintaining clearances to combustible materials to prevent fires.
Details hazards of unattended use, proximity to structures/liquids, and emergency fire response.
Covers approved pellet types, specifications, and safe storage practices.
Lists CO poisoning symptoms and identifies groups at higher risk.
Requires constant supervision, outdoor use, and proper clearance from surroundings.
Mandates stable surfaces, safe ash disposal in containers, and proper covering.
Advises on pellet levels, avoiding hopper storage, and managing creosote to prevent fires.
Lists actions to avoid, like using as a heater, improper fueling, or working on a plugged-in unit.
Covers preparation, attaching legs, bottom shelf, and wheels with assistance.
Details installing the chimney, cap, and handle assembly, including adjustments.
Instructions for installing grease bucket, ash cup, heat deflector, and drip tray.
Guides on positioning the warming rack and cooking grate.
Explains cleaning the burner port before each use to remove ash and ensure proper function.
Emphasizes operating the grill only with the ash cup in place and keeping the clean-out port closed.
Explains turning the grill on/off and the shutdown procedure for cooling.
Details dial settings like Shutdown, Feed, Smoke, and temperature controls.
Covers display readouts and the process for filling the auger tube with pellets.
Explains display codes and the grill's startup cycle.
Recommends initial burn-in and describes the cooking process and temperature selection.
Details bypass mode for restarts and how to use the meat probe for temperature monitoring.
Advises on meat probe usage limits and general cleaning of grates and surfaces.
Explains chimney cleaning to prevent creosote fires and the required frequency.
Provides solutions for grill not turning on or not heating up, checking fuses and pellets.
Addresses error codes like SENSR, PRERR, and blank displays and how to resolve them.
Covers problems with pellet feeding, auger motor, and auger pin, suggesting checks.
Details the warranty coverage, exclusions, required maintenance, and how to obtain service.
General