CAMSO ATV T4S - User Manual

Questions and Answers

E
Ebony BaileyAug 12, 2025
How to fix overheating of CAMSO ATV T4S guiding components?
- C
  Claudia HintonAug 12, 2025
  If you notice your CAMSO Automobile Accessories system guiding components overheating, accompanied by a burned rubber or plastic odor, it could be due to several reasons. A wheel might be blocked, in which case you should try to free the wheel and replace it if necessary. The system could also be misaligned; correct the track system alignment. Constant turning or uninterrupted use in rutted trails can also cause overheating. Vary your turning radius and seek areas that can help lubricate the system, or vary your line out of ruts and seek areas that can help lubricate the system.
R
Ray BowersAug 16, 2025
What to do if my CAMSO Automobile Accessories experience loss of power?
- C
  Christopher MitchellAug 16, 2025
  Loss of power in your CAMSO Automobile Accessories could stem from several issues. The track tension might be too high, so lowering it could resolve the problem. Ensure that the sprockets are free of mud, snow, or any other contaminants; an optional Sprocket Scraper kit is available through Customer Service. Remove any ice or snow buildup on the wheels and clear all compacted snow between the frame and wheels. Snow infiltration in the vehicle’s air intake or clutch system can also cause power loss; if this occurs, remove the snow and contact your dealer immediately.
R
ronald68Aug 25, 2025
What to do if CAMSO Automobile Accessories partially or totally derails?
- A
  Allison FrenchAug 25, 2025
  Partial or total derailing of your CAMSO Automobile Accessories can occur for a few reasons. Severe wear on one or several components may be the cause; check the tensioner alignment and inspect for wear on the track guide, inside driving lugs, and wheels. If the track tension is too low, adjust it on the track system units. Misalignment of the track system or an incorrect angle of attack can also lead to derailing; adjust the angle of attack of the track system and vehicle alignment as per the manufacturer's specifications.
A
andremullinsAug 27, 2025
Why CAMSO Automobile Accessories have unstable behavior?
- A
  alvarezkimberlyAug 27, 2025
  If your CAMSO Automobile Accessories exhibits unstable behavior, it could be due to a few reasons. The angle of attack might be incorrectly adjusted; adjust it according to the manufacturer's specifications. Track tension that is too high can also cause instability; adjust the track tension. Misalignment of the track system can also lead to unstable behavior; correct the alignment.
J
Jessica RodriguezAug 31, 2025
Why CAMSO ATV T4S have insufficient snow flotation?
- H
  Henry JohnsonAug 31, 2025
  Insufficient snow flotation with your CAMSO Automobile Accessories can occur if the anti-rotation mechanism is incorrectly adjusted. Adjust the angle of attack as per the manufacturer’s specifications. It may also be caused by a worn or damaged rubber damper or stabilizing rod.
K
Kenneth RobertsSep 4, 2025
Why is my CAMSO Offroad Vehicle vibrating abnormally?
- D
  Daniel HarrisSep 4, 2025
  Abnormal vibration in your CAMSO Offroad Vehicle can stem from several causes. It could be due to debris in the system, severe wear on a wheel creating a flat spot, or a frozen sprocket or wheel. The vibration might also indicate the beginning of derailing, dirt between the wheel hub and track system hub, a damaged hub or wheel bearing, or deformed parts from impact. Incorrect angle of attack, excessive track tension or misalignment of the track system can also be the reason. To resolve this, remove any debris, replace worn or damaged parts, clear ice or snow buildup, check and realign the tensioner and track system, clean contact surfaces, adjust the angle of attack and track tension, and correct any misalignment.
S
Suzanne LeeNov 19, 2025
Why my CAMSO ATV T4S have abnormal vibration?
- D
  Daniel OlsonNov 19, 2025
  Abnormal vibration in your CAMSO Automobile Accessories can be attributed to several factors. Debris in the system may be preventing proper operation, so remove any obstructions. Severe and localized wear on a wheel, resulting in a flat spot, necessitates replacing the part. A frozen sprocket or wheel requires the removal of ice or snow build-up; storing the vehicle at temperatures higher than 0°C might be required; an optional Sprocket Scraper kit is available through Customer Service. If derailing is beginning, check the tensioner alignment, ensure the track is well-guided by the wheels and track guide, and realign the track system if needed. Dirt between the wheel hub and track system hub could cause incorrect seating of mating surfaces; remove the system and clean the contact surfaces ...

CAMSO ATV T4S Specifications

General

Brand	CAMSO
Model	ATV T4S
Category	Automobile Accessories
Language	English

Related product manuals