Camtree HUNT - Dovetail Shoulder Mount Rig Assembly; Handle Brackets and Handle Attachment; Dovetail Plate to Cross Bar

CAMTREE HUNT Dovetail Shoulder Rig For Red One Camera 5
Note: If you wish to use your setup as a shoulder mounted rig then you can use following steps to
assemble your rig.
 Aach handle brackets to cross bar and ghten with provided knobs to secure as shown
below.
 Now aach handles to handle brackets and ghten the knobs to secure. You can also adjust
angle of Handles by using these knobs.
 Slide in the dovetail plate onto the cross bar and secure with provided knob.
ASSEMBLING OF DOVETAIL SHOULDER MOUNT RIG