PRE-RIDE INSPECTION
Always inspect an d confirm the safe operating condition of your vehicle prior to
ride. Always follow the maintenance schedule described in this Operator's Guide.
WARNING
Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash.
Before using this vehicle, the operator should always perform the following
pre-ride inspection check list.
Refer to
MAINTENANCE PROCEDURES
for deta ils.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Tires
Check tire pressure and co ndi tion. Refer to
SPECIFICATIONS
and adjust according to load.
Wheels
Check w heels for damage and for abnormal play. Make
sure that lug nuts are tightened. Refer to
WHEELS AND
TIRES
in
MAINTENANCE PROCEDURES
for torque
specification.
Radiator
Check cleanliness of the radiator.
Front grill kit Inspect front grill kit for cleanliness.
Engine oil
Check engine oil level.
Coolant Check coolant level.
Brake fluid
Check brake fluid level.
Engine air filter
Inspect the engine air filter, cle an or replace if needed
(service more often when riding in dusty conditions).
CVT air filter
Inspect and clean the CVT air filter (when riding in dusty
conditions).
Drive shaft boots
Check drive shaft boots and protectors condition.
14
_______
SAFETY I
NFORMATION
________
To Next Page
Loading...
Need help?
General