Only use lamps of the same type and Wattage installed on
the device.
CUSTOMER ASSISTANCE SERVICE
Before contacting the Technical Assistance Service:
If the product does not operate at all, we advise you to:
- check that the plug has been inserted into the power socket
correctly.
If you cannot identify the cause of the operating anomaly:
switch o the appliance (do not subject it to rough treatment)
and contact the Assistance Service.
It is important that you inform the Assistance Service of your
product code and its serial number (a 16-character code which
begins with the number 3); this can be found on the guarantee
certicate or on the data plate located inside the appliance.
This will help to avoid wasted journeys being made by
technicians, thereby (and most signicantly) saving the cor-
responding callout charges.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.
- 26 -
To Next Page
Loading...
Need help?
General
