! Parameter adjustment is performed by
pressing the "OPTIONS" (-) and "TABS"
(+) buttons.
!
To adjust the SOFTENER see the specific
Chapter of the manual.
! To adjust the BUZZER see the specific
paragraph.
! To adjust the MEMO FUNCTION see the
specific paragraph.
Models with Smart Loading Sensor
The "Auto Daily Wash" programme, thanks
to an algorithm that analyses the degree of
dirtiness of the dishes in real time,
automatically sets the ideal temperature
and washing time , optimising water and
electricity consumption
Models with dirt sensor
(Only on some models).
The dishwasher is equipped with a dirt
sensor, capable of analysing water murkiness
during all "AUTOMATIC" programme
phases (see programme legend). Thanks
to this device, the wash cycle parameters
are automatically adapted to the real
quantity of dirt on dishes. This is because
water murkiness is linked to the quantity of
dirt on dishes. Thus, excellent washing
results are guaranteed while optimising
water and energy consumption.
The "IMPULSE" programmes use an
impulse washing technology, which reduces
consumption and noise, and improves
performance.
The cycle is automatically paused and the
message "DOOR OPEN" appears on the
display when a door is opened while the
program is running. Every 7 seconds or
when any button is pressed the message:
• "ADD-DISH ON" appears if dishes can be
added and correct washing is guaranteed.
• "ADD-DISH OFF" appears if dishes
should not be added because correct
washing cannot be guaranteed.
The cycle restarts from where it left off
when the door is closed.
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically. Close the door, without
pressing any buttons. The cycle will start
from where it left off.