MYV dfcWRTV `W eYV Z_UfTeZ`_ Y`S ^Rj SV VRdZ]j T]VR_VU Z_ eYV W`]]`hZ_X hRj>
MjaV `W T`_eR^1
Z_ReZ`_
GVeY`U `W T]VR_Z_X
A]VR_Z_X ^ReVcZR]d
A]VR__Vdd R_U GRZ_eV_R_TV
DRZ]fcV BZda]Rj R_U E_daVTeZ`_
Afde`^Vc ARcV
LVcgZTV
ENGLISH
Problem Possible causes What to do
F1-F6 Temperature sensor failure Please contact the supplier.
F9-FA
Temperature sensor of the IGBT
failure.
Please contact the supplier.
FC
The connection between the
display board and the main
board is fail
Please contact the supplier.
E1/E2 Abnormal supply voltage Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E3/E4
Temper
ature sensor of the
ceramic glass plate Is high
Please restart after the
induction hob cools down.
E5 Temperature sensor of the IGBT
Is high
Please restart after the
induction hob cools down.
13
To Next Page
Loading...
