34
35
H
2
1
4
3
h
mm
EN
βDIGITALβ DISPLAY
The displayβs indicator
system allows you to be
constantly informed about
the status of the machine:
1) SPIN SPEED
Once the programme has
been selected, the
maximum spin speed
allowed for that programme
appears on the display.
Pressing the spin button will
reduce the speed by 100
rpm each time the button is
pressed. The minimum
speed allowed is 400 rpm, or
it is possible to omit the spin
by pressing the spin button
repeatedly.
2) DELAY START LIGHT
This flashes when delay start
has been set.
3) PROGRAMME START LIGHT
This lights up when the START
button has been pressed.
4) CYCLE DURATION
When a programme is
selected the display
automatically shows the
cycle duration, which can
vary, depending on the
options selected.
Once the programme has
started you will be kept
informed constantly of the
time remaining to the end of
the wash.
The appliance calculates
the time to the end of the
selected programme based
upon a standard loading,
during the cycle, the
appliance corrects the time
to that applicable to the
size and composition of the
load.
IT
DISPLAY DIGIT
Il sistema di segnalazione del
display consente di essere
costantemente informati sul
funzionamento dellβ
apparecchio:
1) GIRI CENTRIFUGA
Una volta selezionato il
programma, sul display
apparirΓ la massima velocitΓ
consentita di centrifuga per
quel programma. Premendo
ripetutamente il pulsante di
centrifuga, la velocitΓ
diminuirΓ ogni volta di 100
g/m. La velocitΓ minima
consentita Γ¨ di 400 g/m,
oppure Γ¨ possibile escludere
la centrifuga premendo
ripetutamente il pulsante di
selezione della centrifuga.
2) SPIA PARTENZA RITARDATA
Lampeggia quando Γ¨
impostata la partenza
ritardata.
3) SPIA INIZIO PROGRAMMA
Si illumina dopo avere
premuto il tasto START.
4) DURATA CICLO
Al momento della selezione di
un programma, verrΓ
automaticamente indicata la
durata del ciclo che potrΓ
variare a seconda delle
opzioni che verranno
selezionate.
Dopo lβ avvio del programma
vi terrΓ costantemente
informati sul tempo restante
alla fine del lavaggio.
Lβapparecchio calcola tale
tempo in base a un carico
standard, ma durante il ciclo
la macchina corregge il
tempo a seconda del volume
e della composizione del
carico.
PT
VISOR βDIGITALβ
O sistema de transmissΓ£o de
informaΓ§Γ΅es do visor permite-lhe
manter-se constantemente
informado sobre o estado da
mΓ‘quina:
1) VELOCIDADE DE
CENTRIFUGAΓΓO
Depois de o programa ter sido
seleccionado,Γ© apresentada no
visor a velocidade de
centrifugaΓ§Γ£o mΓ‘xima admitida
para esse programa. Cada
pressΓ£o no botΓ£o de selecΓ§Γ£o
da velocidade de
centrifugaΓ§Γ£o reduz a
velocidade de centrifugaΓ§Γ£o
em 100 rpm. A velocidade de
centrifugaΓ§Γ£o mΓnima admitida
Γ© de 400 rpm, sendo que, em
alternativa,tambΓ©m Γ© possΓvel
suprimir a centrifugaΓ§Γ£o final,
para o que basta premir
repetidamente o botΓ£o de
selecΓ§Γ£o da velocidade de
centrifugaΓ§Γ£o.
2) INDICADOR LUMINOSO DE
ARRANQUE RETARDADO
Este indicador luminoso fica a
picar sempre que tiver sido
programado um arranque
retardado do programa.
3) INDICADOR LUMINOSO DE
ARRANQUE DO PROGRAMA
Este indicador luminoso ilumina-
se depois de o botΓ£oβSTARTβ
(arranque) ter sido premido.
4) DURAΓΓO DO CICLO
Sempre que um programa Γ©
seleccionado Γ©
automaticamente apresentada
no visor a duraΓ§Γ£o do ciclo,que
pode variar em funΓ§Γ£o das
opΓ§Γ΅es seleccionadas.
Depois de o programa se iniciar,
o utilizador Γ© constantemente
mantido ao corrente do tempo
que falta atΓ© ao fim da
lavagem.
A mΓ‘quina calcula o tempo na
base de um carregamento
standard,no entanto no
decorrer do ciclo a mΓ‘quina
corrigirΓ‘ o tempo segundo o
volume e a composiΓ§Γ£o do
carregamento.
EL
ξΌξξξξKξ ξξξξξ
ξΆξ ξξξξξξξξξ ξξξ ξξξξξξ ξξξ
ξξξξξξξξξξ ξξ ξξξξξ ξξξξξ
ξ§ξ
ξξξξξξξ’ξξξξξ ξξξ ξξξ ξξξξξξξξξ
ξξξ ξξξξξξξξ:
1) ξ±ξ²ξξξ±ξξ±ξ² ξξ±ξξΆξ¨ξξ©
ξξξξξ ξξξξξξ
ξξξ ξξ ξξξξξξξξξ, ξ
ξξξξξξξξ ξξξξξξξξξξ ξξξξξξξ
ξξξξξ£ξ§ξ ξξξ ξξ ξξξξξξξξξξξξ
ξξξξξξξξξ ξξξ£ξξξξ‘ξξξξ ξξξξ
ξξξξξ. ξξξξ§ξξξξ ξξ ξξξξξξξ ξξ’ξ
ξξξξξ£ξ§ξ ξξ ξξξξ§ξξξ ξξξ ξξξ
ξξξξξ
ξξξξ 100 rpm ξξξξ ξ£ξξξ. ξΆ
ξξξξ
ξξξξξ ξξξξξξξ ξξξξξ£ξ§ξ ξξξξξ
400 rpm, ξ ξξξξξξξξ ξξ
ξξξξξ§ξξξξ ξξξ ξξξξξ£ξξ (ξξξξ₯ξξξ)
ξξξξ§ξξξξ ξξξξξξ
ξξξ ξξ ξξξξξξξ
ξξ’ξ ξξξξξ£ξ§ξ.
2) ξξξξ©ξξ² ξξ―ξ±ξ²ξξ
ξΆξ©ξΆξξΆξ°ξξξ―ξ©ξξ ξ―ξ©ξ²ξξξξ
ξ ξξξ
ξξξ ξξξξ ξξξξξξξξξξξ ξξξξ
ξξ
ξξξ ξξξξξξ ξξξξξ
ξξξξξξξξξξ.
3) ξ³ξ²ξͺξ’ξ£ξ ξ‘KKξ£ξͺξ§ξ«ξ§ξ«
ξ°ξ€ξ¦ξξ€ξξ΄ξ΄ξξ±ξ¦ξ«
ξξξξ ξ ξξξξξξ ξξξξξξ
ξξξξ
ξ
ξξξξξξξ ξξ ξξξξξξξ START.
4) ξξξ²ξKξ―ξξ² KξKξξΆξ ξξξξξξ
ξ΄ξξξ ξξ
ξξ ξξξξξξ
ξξξ ξξξ
ξξξξξξξξξ ξ ξξξξξ ξξξξξξξξξ‘ξξ
ξξξξξξξξ ξξ ξξξξξξξξ ξξξ ξξξξξξ
ξξξξξξ, ξξξ ξξξξξξ ξξ ξξξξ£ξξξξ
ξξξξ ξ£ξξξ, ξξξξξξξ ξξ ξξξ
ξξξξξξξξξξξ ξξξ ξξ
ξξξ
ξξξξξξ
ξξξ. ξ²ξξ ξξ ξξξξξξ ξξξ ξξ
ξξξξξξξξξ ξξ ξξξξξξξξξ ξξ ξξξξξ
ξξξξξ
ξ§ξ ξξξξξξξξ ξξξ ξξξ
ξξξξξξξξξξξξξ ξ
ξξξξ ξξξ ξξξξξξ
ξξξξξξ.
ξ§ ξξξξξξξ ξξξξξξ·ξξξξ
ξξξ ξξξξξ
ξ·ξ
ξ ξξξ ξξξξξξξξξξ ξξξ
ξξξ
ξξξ·ξξξξξ ξξξξ·ξξξξξξξξ ξξξξ
ξξξξξξ
ξξξΉ ξ΅ξξξξξξ ξξξ
ξξξξ ξξξ
ξξξξ ξξξ ξξΉξξξξ ξξξΉξξξ ξ
ξξξξξξξ ξξ
ξξξξξξξ
ξξξ ξξ
ξξξξξ
ξ
ξξξξ ξξξ ξξξξ·ξξξξ
ξξξ ξξΉξξξξξξ
ξξξ ξ΅ξξξξξξ ξξξ ξξξξ
ξξ
ξξξξξξ
ξξξξ ξξξξ.
ES
DISPLAY DIGITAL
El sistema de aviso del display
permite estar constantemente
informado del funcionamento
del aparato:
1) VELOCIDAD DE
CENTRIFUGADO
Una vez seleccionado el
programa, en el display
aparecerΓ‘ la mΓ‘xima
velocidad de centrifugado
permitida para dicho
programa. Pulsando
repetidamente el botΓ³n de
centrifugado, la velocidad
disminuirΓ‘ 100 vueltas/minuto
cada vez. La velocidad
mΓnima permitida es de 400
v/m, o bien es posible omitir el
centrifugado pulsando
repetidamente el botΓ³n de
selecciΓ³n de centrifugado.
2) LUZ INDICADORA DE INICIO
RETARDADO
Parpadea cuando se ha
seleccionado el programa de
inicio retardado
3) LUZ INDICADORA DE INICIO
DE PROGRAMA
Se ilumina tras pulsar la tecla
INICIO.
4) DURACIΓN DEL CICLO
En el momento de la selecciΓ³n
de un programa, se indicarΓ‘
automΓ‘ticamente la duraciΓ³n
del ciclo, que podrΓ‘ variar
segΓΊn las opciones
seleccionadas.
DespuΓ©s de iniciarse el
programa, el display
mantendrΓ‘ al usuario
constantemente informado
sobre el tiempo que resta para
el tΓ©rmino del lavado.
La lavadora calcula el tiempo
en base a una carga
estΓ‘ndar, pero
durante el ciclo corrige el
tiempo segΓΊn el volumen y la
composiciΓ³n de la carga.