Need help?Do you have a question about the Cannon DIGI-TROLL 10 and is the answer not in the manual?
General| Type | Downrigger |
|---|---|
| Rod Holder | Yes |
| Digital Depth Counter | Yes |
| Positive Ion Control | Yes |
| Weight Capacity | 20 lb |
| Motor | 12V DC |
| Speed | 250 feet per minute |
| Boom Length | 24 inches |
| Mounting | Swivel base |
| Max Depth | 250 feet |
| Line Capacity | 400 feet of 150 lb test stainless steel cable |
Describes the downrigger and the manual's scope of coverage.
Warns about intended use and proper operation to avoid risks.
Instructs users on how to register and obtain warranty benefits.
Details warranty terms, exclusions, and limitations for the product.
Outlines the service policy and repair charges after the warranty period.
Explains the process for enforcing warranty or obtaining repairs.
Lists and describes the main components of the Digi-Troll 10 TS.
Discusses choosing an optimal mounting location on a boat.
Provides instructions for mounting the base on decks of various thicknesses.
Details mounting procedures for thin decks and the low-profile swivel base.
Specific instructions for adjusting the telescopic boom length.
Instructions for installing the boom end pulley on a telescopic boom.
Step-by-step guide to remove and reassemble the removable spool cover.
Instructions for replacing the clutch pad on the downrigger.
Instructions for mounting the rod holders to the downrigger.
Step-by-step guide for terminating the downrigger cable.
Instructions for attaching the line release to the downrigger weight.
Steps to install the Intellitroll antenna and sensor kit.
Instructions for using the manual crank handle in case of power loss.
Discusses boat electrical setup and its relation to Positive Ion Control.
Details electrical ratings, wiring instructions, and warnings.
Instructions for properly connecting the downrigger to the boat battery.
Guidelines for selecting appropriate fuse and breaker sizes.
Instructions for wiring multiple downriggers to a battery system.
Critical steps for proper transducer installation for depth tracking.
Guidance on choosing the optimal location for transducer mounting.
Detailed procedure for mounting the transducer to the boat transom.
Steps for routing and connecting the transducer cable to the downrigger.
Lists the advanced features and basic operation of the Digi-Troll 10.
Describes the information shown on the downrigger's display.
Explains the functions and usage of each key on the keypad.
Explains the various icons and their layout on the LCD display.
Description of the keypad and LCD backlight functionality.
Overview of the menus available for programming and customization.
Summarizes the downrigger's menu system structure and navigation.
Details how to set depth limits and responsiveness for bottom tracking.
Explains how to set cycle time, up, and down depth boundaries.
Adjusting the speed of the weight in the UP direction.
Adjusting the speed of the weight in the DOWN direction.
Controlling the Positive Ion Control (PIC) level.
Setting the amount of line on the reel for accurate line out.
Switching between English and Metric units for measurements.
Switching between Cannon coated and uncoated cable settings.
Setting an offset for the sonar value to account for transducer height.
Using the unit as a depth finder with optional transducer or Cannonlink.
Programming and storing up to five depths for quick weight movement.
Default settings provided for immediate use of the downrigger.
Connecting up to six Digi-Troll units together for advanced features.
Compatibility and information regarding the Intellitroll Speed and Temp sensor.
Basic operation steps for fishing with the downrigger.
Instructions on how to manually control the descent of the weight.
Explanation of the Short Stop system components and function.
Explains the operation and electrical principles of the PIC system.
How to measure natural electrolysis and PIC voltage and use PIC effectively.
Provides advice on routine maintenance for the downrigger.
Explains blowback phenomena and provides charts for depth calculation.
A list of practical tips for effective trolling techniques.
Troubleshooting for power issues and periodic stopping problems.
Troubleshooting for incorrect line count and depth accuracy.
Troubleshooting for water line stop and sonar display issues.
Troubleshooting for bottom following and clutch slip problems.
Diagram showing the identification of parts for the Digi-Troll 10.
List of replacement parts for the Digi-Troll 10 model.
Diagram showing the identification of parts for the Digi-Troll 10 TS.
List of replacement parts for the Digi-Troll 10 TS model.
Schematic illustrating the wiring connections for the Digi-Troll 10 series.
Information regarding the Waste Electrical and Electronic Equipment Directive.
To Next Page
