Need help?Do you have a question about the Cannondale Scalpel HT and is the answer not in the manual?
Defines WARNING and NOTICE symbols used to convey critical safety information and precautions.
Provides contact details for Cannondale USA, CSG Europe, and International Distributors for support.
Warns that unauthorized service or parts can cause damage and void warranties.
Highlights safety related to carbon fiber components, emphasizing inspection and potential failure.
Details post-crash inspection procedures for carbon frames and forks, identifying signs of damage.
Specifies the intended use of the bicycle as ASTM CONDITION 3, Cross-Country.
Warns about risks associated with improper mechanical work and recommends dealer servicing.
Emphasizes the importance of correct tightening torques for safety and durability, recommending dealer assistance.
Explains the critical safety specification of maximum fork length for front suspension mountain bikes.
Advises on selecting correct tire sizes to avoid contact with frame/fork and ensure safety.
Locates the serial number on the bottom bracket and directs users to the website for registration.
Details the requirement for minimum seat post insertion depth into the frame for safety.
Lists detailed technical specifications for the bicycle, including dimensions and components.
Presents geometric measurements of the Scalpel HT 100 (Lefty Ocho) model across different sizes.
Presents geometric measurements of the Scalpel HT 110 (Lefty Ocho 120) model across different sizes.
Provides instructions for installing and adjusting the seat post, including preparation and tightening.
Details minimum insertion depth and explains how to determine maximum safe seat post insertion length.
Illustrates seat post components and shows where to apply carbon paste and torque specifications.
Details the procedure for installing and positioning the chain guide correctly on the bike.
Identifies chain guide parts and illustrates the correct installation process and torque settings.
Provides instructions for cleaning, applying Loctite, and installing PF30 bottom bracket cups.
Explains the installation, replacement, and torque requirements for the Universal Derailleur Hanger (UDH).
Illustrates how to route control cables (rear derailleur, brake, dropper post) inside the frame.
Details the placement of chain plate and chainstay protectors to prevent frame damage.
Lists key replacement parts with their IDs, part numbers, and descriptions for the Scalpel HT.
Provides a supplemental maintenance schedule including cable routing, frame protection, and damage inspection.
Warns that poorly maintained bikes can fail, leading to accidents, and stresses frequent checks.
General| Frame Material | Carbon |
|---|---|
| Fork Travel | 100mm |
| Brake Type | Hydraulic Disc |
| Wheel Size | 29" |
| Fork | Lefty Ocho |
To Next Page