Unbox the e-bike charger and remove any additional
packaging from the charger itself.
Read the instructions included with the charger, then assemble the
charger.
Insert the charging end into the charge port. Be sure to orient the
charging end with the port.
Open the charge port, located near the pedals.
Prior to inserting the charger, ensure the lock ring on the charging
end is in the open position.
Insert the charger into the charge port, then turn the lock ring
clockwise to lock it into place.
When the charger is properly installed, the power button will glow
white, then transition to a yellow and orange fade. This conrms your
e-bike is charging.
R.
T.
V.
W.
X.
U
V
W
X
SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK
To Next Page
Loading...
