Cannondale Treadwell Neo - E-Bike Parts Overview



This video applies to one Cannondale Platform:
• Treadwell Neo
Tools Needed:
• Flat-Head Screwdriver
• Phillips-Head Screwdriver
• Box Cutter
• Scissors
Tools Included:
• Torque Wrench
• Allen Keys
• Pedal Wrench
Gently lift your bike out of the box and set
it on top of the box. Make sure the attached
wheel is facing upwards
Use a at head screwdriver to carefully open the upper ap of the
box.
Prior to assembling your bike, review the pre-ride checklist and
Assembly Instruction Guide.
Conrm that a builder has completed the checklist.
Carefully lift the bike out of the box and set it onto the top of the box.
Remove the front wheel from the bike by carefully removing the zip
ties or Velcro, then remove all packaging from the wheel and set it
aside.
Remove all additional packaging from the bike.
Carefully lift and rotate the bike, lowering it gently back into the box
with the fork overhanging the side of the box.
A.

C.
D.

F.
G.
D
SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK