242
This function is convenient when you want to change the ISO speed,
sound-recording level, etc., silently while shooting a movie.
When [z5: Silent Control] is set to
[Enable h], you can use the touch pad
<h> on the inner ring of the Quick
Control Dial.
You can operate the camera silently just
by touching the top, bottom, left, or right
of <h>.
During movie shooting, you can press
<Q> to display the Quick Control screen
and change the settings below with
<h>.
3 Silent Control
Settable
Functions
Shooting Mode
d/B sfa
1. Shutter speed – k – k
2. Aperture – – kk
3. ISO speed – – – k
4. Exposure
compensation
kkk –
5. Sound-
recording level
kkkk
If [z5: Silent Control] is set to [Enable h], you cannot adjust the
sound-recording level with the <5> Quick Control dial during movie
shooting.
Even if you change the aperture silently with <h>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on <h>, the touch operation may not work. In
such a case, use a clean cloth to clean <h>. If it still does not work, wait
a while and try again.
Before shooting a movie, use <h> to adjust the sound-recording level in
the Quick Control and [Rec. level] screens.
To Next Page
Loading...
