364
You can check the battery’s condition on the LCD monitor.
Select [Battery info.].
Under the [53] tab, select [Battery
info.], then press <0>.
3 Checking the Battery Information
Battery model or household power source
being used.
The battery level icon (p.39) is displayed
together with the remaining battery
capacity shown in 1% increments.
Shots taken with the current battery. The
number is reset when the battery is
recharged (p.30).
Battery’s recharge performance level is
displayed in one of three levels.
(Green):
Battery’s recharge performance is fine.
(Green):
Battery’s recharge performance is
slightly degraded.
(Red):
Purchasing a new battery is recommended.
The use of a genuine Canon Battery Pack LP-E4N or LP-E4 is recommended.
If you use any battery other than the Battery Pack LP-E4N or LP-E4, the
camera’s full performance may not be attained or malfunction may result.
The shutter count is the number of still photos taken. (Movies are not counted.)
If [Calibration is recommended when charging battery next time] is
displayed, see page 32.
If for some reason, communication with the battery is not successful, [
Use
this battery?
] will be displayed. Just select [
OK
] and you can continue
shooting. However, the battery information screen might not appear.
To Next Page
Loading...
