Canon EOS 1D Mark II N - Installing and Removing the Battery

25
1
Detach the battery compartment
cap.
Grasp both sides of the cap and pull it
off.
2
Insert the battery.
Insert the battery and while pushing it
in, turn the release handle as shown
by the arrow.
When the <
4> switch is set to <1> (p.33), the battery level will be
indicated at one of four levels:
z : Battery level OK.
x : Battery level is low.
b : Battery will be exhausted soon.
n : Battery must be recharged.
Installing and Removing the Battery
Installing the Battery
Checking the Battery Level
If the battery’s rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Rubber lining