358
The camera’s shooting modes, menus, Custom Functions, and other
camera settings can be saved to the card as a camera settings file.
When this file is loaded by the camera, the saved camera settings will
be applied.
Convenient when you want to load the camera settings from a different
EOS-1D X body and set the camera in the same way. Or you can save
and load different camera settings for different shooting situations.
1
Select [Save/load cam settings on
card].
Under the [54] tab, select [Save/load
cam settings on card], then press
<0>.
2
Select [Save to card].
Turn the <5> dial to select [Save to
card
], then press <0>.
3
Select [Start].
Turn the <5> dial to select [Start],
then press <0>.
X The camera settings will be saved to
the card, and the screen in step 2 will
reappear.
If you select [Change file name]
, you
can change the file name (8 characters)
and save the file.
For the procedure, see “Changing the
File Name” on page 162. The number
of characters that can be entered will
be different, but the procedure for
entering the file name is the same.
3
Saving and Loading Camera Settings
Saving Camera Settings
To Next Page
Loading...
