Canon EOS-1D - Erasing an Image; Erasing a Single Image

122
Sound Recording for an Image / Erasing an Image
Erasing an Image
•
A sound recording is not possible on a protected image.
•
The EOS-1D camera itself cannot play back the sound recording. You must
transfer the image to a personal computer and use the bundled driver software to
play the sound recording.
•
The < > button has dual functions for image protection and sound recording.
If you press the <
> button and release it immediately, image protection will
function instead of the sound recording. To make a sound recording, keep
pressing the <
> button until the “Recording” message appears and let go
when you finish the sound recording.
•
You cannot erase only the sound recording with the camera alone.
You can use the < > button to erase a single image or all images in a folder. You can also
use menu commands to erase all images in a CF card.
•
Once an image is erased, it cannot be recovered. Make sure you are erasing the right
image.
•
You can protect important images from erasing. (→p.119)
Erasing a Single Image
Playback the image.
•
Press the < > button to playback the image.
s
The last (newest) image will be displayed.
1
Select the image to be erased.
•
While pressing the < > button, turn the < >
dial to select the image to be erased.
2
Display the erase menu.
•
Press the < > button.
s
The erase menu will appear at the bottom of the
LCD monitor. To exit the erase menu, press the
<
> button again.
•
You can also follow steps
3
and
4
to erase an
image immediately after it is taken.
3