25
Before You Start
1
Using an AC Outlet
With the DC Coupler Kit, you can connect the camera to an AC outlet to supply power. Then
you do not have to worry about exhausting the battery.
Insert the DC Coupler.
•
Insert the coupler and while pushing it in, turn the
release handle as shown by the arrow.
1
Connect the AC adapter's plug to the DC
terminal.
2
Connect the power cord.
•
Connect the power cord to the AC adapter.
•
Connect the power cord's plug to the AC outlet.
•
After you finish using the camera, set the < >
switch to <
> and remove the plug from the AC
outlet.
3
•
When connecting the camera to an AC outlet, do not use any adapter other than
the DC Coupler Kit.
•
Do not use the DC Coupler Kit with any other camera.
•
Do not get the DC coupler wet, as when using it outdoors, since it is not water
resistant.
•
Do not remove the plug or DC adapter power cord from AC outlet with the < >
switch set to <
>, because it may cause the camera stop operating. If the
camera stops operation, remove the DC coupler from the camera and reinstall it.
Then the camera will return to normal conditions.
To Next Page
Loading...
