51
Settings for Images
2
Selecting the Processing Parameters
MENU
The processing parameters consist of the Tone Curve, Sharpness, and JPEG Quality. With the
driver software, you can set each of these parameters as desired and register them as a
custom set of processing parameters. You can set and register up to three custom sets of
processing parameters. For details, see the separate “EOS-1D Software Instructions.”
About Processing Parameters
Parameter
Tone
Curve
Description
Adjusts the image brightness
and color properties.
Setting
Tone Curve
Effect
You can change the image brightness
and color balance as desired.
Sharpness Level
Adjusts the sharpness level. 1 2 3 4 5
A higher number will result in a
sharper image.
Selects the pattern type to be
sharpened.
(pattern sharpness)
Rough
“Rough” will sharpen the rough
patterns of the image.
“Fine” will sharpen the fine patterns
of the image.
Moderately rough
Standard
Moderately fine
Fine
JPEG Quality
Sets the image quality of the
(Fine) mode.
Sets the image quality of the
(Normal) mode.
6 7 8 9 10
1 2 3 4 5
A higher number will result in a
higher image quality.
Up to three parameter sets can be registered.
The tone curve can be set.
The sharpness level and pattern
sharpness can be set to one of
five levels.
The JPEG quality can be set to one of five settings for the
(Fine)
and
(Normal) modes.
To Next Page
Loading...
