73
Using Autofocus (AF)
3
When Autofocus Fails (Manual Focusing)
Autofocus can fail to achieve focus (the focus confirmation light blinks) with certain subjects
such as the following:
(a) Low-contrast subjects (blue sky, solid-color walls, etc.).
(b) Subjects in low light.
(c) Extremely backlit reflective subjects (car with a reflective body, etc.).
(d) Overlapping near and far objects (animal in a cage, etc.).
In such cases, do one of the following:
1. Focus an object at the same distance as the subject and lock the focus before recomposing.
2. Set the lens focus mode switch to <
> (or < > on older lenses) and focus manually.
(→p.26)
If focus cannot be achieved with the AF-assist light of a Speedlite or ST-E2, select
the center AF point. An off-center AF point might not be able to achieve focus.
To Next Page
Loading...
