90
Manual Exposure
In this mode, you set both the shutter speed and aperture for total exposure control. You can
refer to the exposure level indicator in the viewfinder or use a handheld exposure meter to
determine the shutter speed and aperture.
Using the Built-in Exposure Meter
While pressing the < > button, turn
the <
> dial until < > appears on the
LCD panel. Then release the <
>
button.
1
Set the < > switch to < >.
2
Turn the < > dial to set the shutter
speed and turn the <
> dial to set the
aperture.
•
To set the aperture, you can also press the < >
button and turn the <
> dial.
3
Focus the subject.
s
The shutter speed and aperture will be displayed.
•
On the right of the viewfinder, the exposure level
indicator <
> indicates the current exposure level
relative to the standard exposure index.
4
To Next Page
Loading...
