Canon EOS-1D - Exposure Compensation with the < > Button and < > Dial

93
Exposure Control
5
Setting Exposure Compensation
Custom Function C.Fn-06-2 enables the exposure compensation amount to be set
in 1/2-stop increments. (→p.134)
The exposure compensation amount’s 1/2-stop increments enabled with C.Fn-06
are indicated in the viewfinder and on the LCD panel as shown below.
–1 1/2 exposure compensation
Exposure Compensation with the < > Button and < > Dial
Press the < > button and turn < >
dial within (
) to set the desired expo-
sure compensation amount.
•
The exposure compensation amount will remain in effect even after the < >
switch is set to <
>.
•
To prevent the < > dial from turning inadvertently and changing the exposure
compensation amount, set the <
> switch to < >.
Take the picture.
4