Starting EOS Viewer Utility
W-15
W
3
Working with Images in EOS Viewer Utility
RAW adjustment tool palette
When you select a RAW image, the name of the camera on which the selected RAW image
was taken and its settable processing parameters are displayed.
If you select the [Advanced] tab, the [Advanced] tab sheet appears.
* The above tool palette shows all the information at once. In actual use, only the information
needed is displayed.
In the RAW adjustment tool palette you cannot edit JPEG images, or TIFF and JPEG
images that were converted from RAW images with EOS Viewer Utility.
The settings used when shots were taken are listed in italic type in the list box.
If the RAW adjustment tool palette is hidden, select the [View] menu [Tool palette]
to show it.
Camera type (W-30)
Displays the name of the camera on which the selected RAW images were taken.
Advanced tab sheet (W-43)
Digital Exposure
Compensation slider (W-31)
Color Temp. input box (W-33)
White Balance list box
(W-32, W-33)
LB Filter slider (W-35)
CC Filter slider (W-35)
Tone Curve button (W-37)
Standard tab sheet (W-41)
Contrast list box (W-40)
Preview checkbox (W-30)
Digital Exposure Compensation
Value display box (W-31)
Save White Balance Settings button
(W-36)
Click White Balance button (W-34)
LB Filter Compensation Value
display box (W-35)
CC Filter Compensation Value
display box (W-35)
Reset to Shot Settings button
(W-30)
Color Matrix list box (W-41)
Color list box (W-43)
Color Space list box (W-43)
Sharpness list box (W-44)
Update button (W-30)
Color Tone list box (W-43)
To Next Page
Loading...
