Canon EOS-1D - Supported Image Formats

Downloading Images
W-17
W
3
Working with Images in EOS Viewer Utility
Supported Image Formats
The following images can be displayed in EOS Viewer Utility.
• RAW and JPEG images shot on an EOS DIGITAL series (1D Mark II, 1Ds, 1D, 10D, D60,
D30, DIGITAL REBEL/300D DIGITAL) camera
• TIFF and JPEG images saved in EOS Viewer Utility (W-45)
• DCF-compliant JPEG images
* Images that cannot be displayed appear as a question mark [?].
4
Click the copied folder.
 The images in the folder are
displayed.
 Before disconnecting the camera
from your computer, exit EOS
Viewer Utility, set the camera’s
power switch to <OFF>, and then
disconnect the dedicated cable.
 You cannot display images in the preview window (W-20) or edit RAW images (W-29)
saved on a memory card in the camera directly. Before working images with EOS
Viewer Utility, be sure to download images saved on a memory card to your
computer.
 For displaying images saved in a third-party card reader, follow the same procedure
to download the target folder to your computer.
 The images that are processed on your computer after being shot or the images
whose file name is changed may not be displayed properly.
 You cannot use the camera while displaying images on the camera.
 Images that were shot with the camera held vertically with [Auto rotate] setting to
<ON> are automatically displayed vertically.
 If the selected folder contains a large number of images, there may be a short delay
before the images appear.