6-4
Taking Shots from Your Computer
You can control the camera from your computer and take single-frame shots, timer shots and
interval timer shots. The images are automatically saved on your computer.
Shots taken with RemoteCapture and saved on your computer can be displayed and image-
processed in the Plug-In Module in the same way as images shot with the camera.
Refer to the Help file for more information on using RemoteCapture.
Using RemoteCapture
1
Set the camera up ready to shoot.
● Focus the camera manually (Manual focus).
2
Click the [Release] button.
\ The image is saved to your computer and displayed on the screen.
● Because RAW images are processed before being displayed, there is a short delay
before the images appear.
● When you select an EOS-1D RAW image and click the [View] button, or when you
select [Display in Viewer] in the [View] menu, the JPEG image (Middle/Fine)
simultaneously recorded with the RAW image is displayed.
● To load an image rotated, select [90 degrees Right] or [90 degrees Left] in
[Rotation] list box before clicking the [Release] button.
●
To rotate a downloaded image, select the image and then select [Rotate Saved Image
90 degrees Right] or [Rotate Saved Image 90 degrees Left] in the [Edit] menu.
● To enlarge the image for checking, select the image and click the [View] button.
\ The image is displayed enlarged in a separate window.
● To delete the image, select the image and click the [Delete] button.
\ The image is deleted.
To Next Page
Loading...
