Canon EOS-1D - Working with Selected Images; Operations that Can be Used with Images

3-13
Working with Images in the Plug-In Module
Working with Selected Images
Operations that Can Be Used with Images
The table below lists the operations available with the Plug-In Module. When a JPEG image is
selected, the unavailable operations are shown grayed out. When operations such as [Rotate
image] are specified for a RAW image recorded in the RAW+JPEG formats, the operations are
also applied to the JPEG image recorded at the same time. However parameters that can only
be used with RAW images, such as [Color Matrix], are not applied.
Image recording formats and image processing options
● Operations marked with an asterisk (*) cannot be used with images saved on a CF card in
the camera and are shown grayed out in the control panel. Save such images to your
computer or use the operation via a card reader.
The sharpness for RAW images can be specified in the [Preferences] dialog box
(➞3-39).
Operations
Checkmark
Protect
Erase
Display AF point
Play sound
Comment input*
Transfer image
Save file
Rotate image
Color Matrix
Digital Exposure
Compensation
Adjust Tone Curve
White balance
Click white balance
IPTC information
RAW
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
JPEG
✓
✓
✓
✓
✓
✓
✓
✓
✓
–
–
–
–
–
–
Description
Used for selecting specific images.
Protects the image so it cannot be erased.
Erases unprotected images.
Displays the focused or the used AF point.
Plays the sound recorded by the camera.
Attaches a brief comment to each frame.
Transfers images to applications such as
Photoshop 5.0 LE.
Saves an image to your computer, etc.
Rotates the image by 90-degree unit.
Sets film-equivalent characteristics or color
range characteristics.
Adjusts the brightness.
Adjusts the brightness and color saturation.
Adjusts the white balance.
Automatically adjusts the white balance.
Sets the IPTC information details.