Canon EOS-1D - Correcting the Brightness (Digital Exposure Compensation)

3-21
Working with Images in the Plug-In Module
Processing RAW Images
2
Correct the image brightness.
● When you drag the slider left or
right with the mouse, the image
brightness can be adjusted.
● The [Preview] button appears in
the Preview mode. When you click
the [Preview] button, the image
brightness changes according to
the value of the new slider
position.
Correcting the Brightness (Digital Exposure Compensation)
You can correct the brightness of an image through the equivalent of +/–2 stops in 0.1-stop
increments.
1
Click the [Digital Exposure Compensation] button.
\ The [Digital Exposure
Compensation] dialog box
appears.
3
Click the [OK] button.
\ The corrected value is applied to
the image and the [Digital
Exposure Compensation] dialog
box closes.
\ The corrected value is displayed
with the corrected image.
The [Digital Exposure Compensation] dialog box
in the Preview mode
The [Digital Exposure Compensation] dialog box
in the Thumbnail display mode