Canon EOS-1D - Click White Balance Function

3-27
Working with Images in the Plug-In Module
Processing RAW Images
Click White Balance Function
This function allows you to automatically adjust the white balance simply by clicking a point in
a white part of the image.
1
Click the [Click white balance] checkbox.
\ The [Click white balance] button is
now enabled.
2
Select a white area.
● When you move the cursor over the image, it changes to the shape of a filler.
● Click in a white area in the image.
\ The white balance is adjusted so that the area clicked appears white and the result
in displayed.
● To adjust the white balance using a different location, click the [Click white balance]
button again.
● To end the Click White Balance procedure, click the checkbox again to clear the
box and end the procedure.