3-29
Working with Images in the Plug-In Module
Setting the IPTC Information
IPTC stands for International Press Telecommunications Council and refers to a standard for
communications and information exchange tags attached to images. The standard was
established by newspaper and communications companies to allow problem-free transmission
of images.
The IPTC tags can be attached to the RAW images taken with an EOS-1D. The owner’s name
and the date/time data is automatically included in the IPTC information as part of the data
specified in the camera setup functions settings in the [Basic Settings] tab sheet in the
[Camera Settings] dialog box. (➞5-4) The specified IPTC information can also be saved or
viewed on your computer.
1
Click the [IPTC Information] button.
\ The [IPTC Information] dialog box
appears.
2
Select an item and specify the information.
● Click the desired IPTC information tab to display the tab sheet.
● Enter the information and click the <return> key.
● If multiple images are selected, use the [<Previous] and [Next>] buttons to switch
between images.
● After using the [<Previous] and [Next>] buttons to switch between images, you can
copy the IPTC information entered for the previous image by clicking the [Go Back]
button.
● Click the [Clear] button to clear all the settings.
3
Click the [Save] button.
\ The specified IPTC information is applied to the image.
● Clicking the [Save As] button saves the specified IPTC information on your
computer.
● Click the [Read] button to read the IPTC information saved on your computer.
4
Click the [OK] button.
\ The specified IPTC information is applied to the image, the [IPTC Information]
dialog box closes and the procedure ends.
To Next Page
Loading...
