Canon EOS-1D - Checking the Settings; Checking, Saving, and Loading Personal Function Settings

5-21
Specifying Camera Settings from Your Computer
Personal Function Settings
Checking, Saving, and Loading Personal Function Settings
Use the procedure below to check the details of the Personal Functions that have been set up.
You can also save the settings on your computer and then load the saved settings and apply
them to the camera.
Checking the Settings
1
Select the [Combination] tab.
\ The [Combination] tab sheet is displayed.
● You can use this tab sheet to check the Personal Function parameters currently set
on your computer and check whether they have been applied to the camera.
2
If the data has not been applied, click either the [OK] button or
the [Apply] button as required.
● Clicking the [OK] button applies the specified settings to the camera and closes the
[Personal Function Settings] dialog box to end the procedure.
● Clicking the [Apply] button applies the specified settings to the camera without
closing the [Personal Function Settings] dialog box.
Clicking the [Load Settings] button replaces the settings with the Personal Function
settings on the camera.