5-26
Setting the Parameters
3
Select the tone curve.
● Select [Standard] or [User
Defined] in the [Tone Curve] list
box.
● When you select [Standard], the
standard tone curve is set.
Proceed to step 10.
● When you select [User Defined], the
tone curve saved to your computer
in “Adjusting the Color and
Brightness (Adjust Tone Curve)”
(➞3-22) is set. Proceed to step 4.
4
Click the [User-Defined Tone Curve] button.
\ The [User-Defined Tone Curve] dialog box appears.
5
Click the [Open] button.
\ The [Open] dialog box appears.
To Next Page
Loading...
