Canon EOS-1V HS - Custom Functions: C.Fn-6 Exposure Level Increments; Custom Functions: C.Fn-7 USM Lens Electronic Manual Focusing

Custom Function Settings
102
Exposure level increments
You can change the increments for the exposure setting (shutter speed
and aperture) and exposure compensation (AE, AEB, flash exposure).
C.Fn-6-1:
Sets whole-stop increments for the shutter speed and
aperture which might be familiar to older users.
C.Fn-6-2: Suited for negative films which have a relatively wide
exposure latitude.
C.Fn
C.Fn-6
Function
Increments for the
exposure setting
(shutter speed/
aperture) and
exposure
compensation
No.
0
1
2
1/3-stop exposure setting/
1/3-stop exposure compensation
1-stop exposure setting/
1/3-stop exposure compensation
1/2-stop exposure setting/
1/2-stop exposure compensation
Description
C.Fn-6
USM lens electronic manual focusing
After focus is achieved in the One-Shot AF mode, electronic manual
focusing is possible
with the following lenses:
EF 50mm f/1.0L USM, EF 85mm f/1.2L USM, EF 200mm f/1.8L USM, EF
300mm f/2.8L USM, EF 400mm f/2.8L USM, EF 400mm f/2.8L II USM, EF
500mm f/4.5L USM, EF 600mm f/4L USM, EF 1200mm f/5.6L USM, EF 28-
80mm f/2.8-4L USM.
C.Fn-7-1: This prevents the focus from being thrown off by inadvertant
turning of the focusing ring after One-Shot AF. (Focusing is
possible before focus is achieved.) With both C.Fn-7-1 and
C.Fn-7-2, manual focusing is possible with the lens focus mode
switch set to
MF or M.
C.Fn-7-2: Electronic manual focusing is disabled in the AF mode.
C.Fn
C.Fn-7
Function
Electronic manual
focusing after One-
Shot AF
No.
0
1
2
Enabled (With C.Fn-4-1/3,
enabled before achieving focus)
Disabled (With C.Fn-4-1/3,
enabled before achieving focus)
Disabled (Disabled before achieving
focus even with C.Fn-4-1/3)
Description
C.Fn-7
SEC.07 P095-114 (E) 29-01-2003 12:29 Pagina 102