Custom Function Settings
104
AEB sequence and auto cancellation
You can alter the standard AEB sequence of correct exposure,
underexposure, and overexposure and prevent AEB cancellation after
changing the lens, reloading film, or turning off the Main Switch.
O: Correct exposure –: Underexposure +: Overexposure
C.Fn-9-1:
You can continue taking AEB shots in this sequence.
C.Fn-9-2: The AEB sequence progresses from the shortest exposure.
C.Fn-9-3: You can continue taking AEB shots in the same sequence
as with C.Fn-9-2.
C.Fn
C.Fn-9
Function
AEB sequence/Auto
cancellation after
lens change, film
loading, or Main
Switch OFF
No.
0
1
2
3
O, –, + / Enabled
O, –, + / Disabled
–, O, + / Enabled
–, O, + / Disabled
Description
C.Fn-9
Focusing point flashing mode
You can disable the in-focus flashing of the focusing point or make it
brighter for easier visibility in bright scenes.
C.Fn-10-1: The focusing point does not flash at all.
C.Fn-10-2:
Prevents the dimmed flashing of C.Fn-10-0.
C.Fn-10-3: Effective when the focusing point flashing is difficult to see
with C.Fn-10-0.
C.Fn
C.Fn-10
Function
Focusing point
flashing mode
No.
0
1
2
3
Enabled
Disabled
Enabled (No dim flashing)
Bright flashing
Description
C.Fn-10
SEC.07 P095-114 (E) 29-01-2003 12:29 Pagina 104
To Next Page
Loading...
