109
Custom Function Settings
Switchover to registered focusing point
C.Fn-18
You can switch to the registered focusing point just by pressing the < >
button. (
→p.42)
C.Fn-18-1: Press the < > to switch to the registered focusing point.
C.Fn-18-2: Switch to the registered focusing point only while you press the
<> button. When you release the button, it switches back to
the previous focusing point.
You can thereby easily switch
between the selected focusing point and registered
focusing point.
C.Fn
C.Fn-18
Function
Switchover to
registered focusing
point
No.
0
1
2
Use only < > button
Switchover only while
pressing < > button
Use < > button
+ < > button
Description
The focusing point activation area centers on the selected focusing point.
Therefore, if a peripheral focusing point is selected, the focusing point activation
area will be smaller as shown below.
If C.Fn-4-1/3 is also set, you can press the < > button to switch to the
registered focusing point and start the AF at the same time. (→p.100)
To Next Page
Loading...
