For EOS-1V HS Users
Attachment screw Contacts
Attachment knob
Battery magazine
<>
Vertical-grip AE lock
button
<> Vertical-grip focusing point
selector
Positioning pin
Film advance coupler
Gear train switching pin
Battery magazine latch
<> Vertical-grip
Main Dial
<> Vertical-grip FE lock/
multi-spot button
Grip Vertical-grip shutter button
ON/OFF switch
Tripod socket
Hand Strap eyelet
116
1
Remove the battery magazine.
• Turn the battery magazine latch as
shown by the arrow. Then pull out the
magazine.
• To reinstall the battery magazine,
follow this procedure in reverse.
2
Install the batteries.
• Refer to the battery orientation
diagram on the magazine and install
the batteries in the proper + and –
orientation. If any battery is not
oriented properly, the Power Drive
Booster will not operate.
• The battery level can be checked
with the camera. (
→p.24)
SEC.08 P115-118 (E) 29-01-2003 12:41 Pagina 116
To Next Page
Loading...
