65
Manual Exposure
In this mode, you set both the shutter speed and aperture for total
exposure control. You can refer to the exposure level indicator in the
viewfinder or use a handheld exposure meter to determine the shutter
speed and aperture.
Using the Built-in Exposure Meter
1
While pressing the < >
button, turn the < > dial until
appears on the LCD panel.
Then release the < > button.
2
Set the < > switch to < >.
3
Turn the < > dial to set the
shutter speed and turn the < >
dial to set the aperture.
• To set the aperture, you can also
press the < > button and turn the
<> dial.
SEC.05 P055-082 (E) 28-01-2003 16:14 Pagina 65
To Next Page
Loading...
